Lucy Pook

Atex Inspector Aberdeen £30ph Inside IR35 6 Months     About the role: We are currently recruiting for an Atex Inspector to work for the DNO on a large-scale Gas terminal plant in St. Fergus, Aberdeenshire. Our client are one of the largest publicly listed utilities, focused on transmission and distribution of electricity and gas.  The Atex Inspector position comes with a rate of £30ph.                     Key skills:

• Undertake installation, inspection, commissioning, operation, repair, maintenance, and emergency response activities associated with Terminal, Compressor Station and Pipeline and AGI systems and assets (including pipeline and rotating machinery) in accordance with relevant policies and procedures, delivering performance excellence within relevant discipline to optimise work effectiveness and efficiencies, maximising asset and plant availability and reliability.
• Support the construction and commissioning of new assets onto the gas transmission system and other non-load related projects in accordance with relevant policies and procedures, identify the requirement to replace/upgrade existing plant and equipment, participate in the design of minor modifications, and the provision of technical support within discipline and competencies as required.
• Ensure that the high-pressure pipeline system is protected, including the monitoring of third-party work, aerial sighting response, cathodic protection monitoring, support of the in-line inspection programme, and undertake competent person role associated with routine and low complex non-routine operational procedures.
• Hold maintenance experience within engineering (Mechanical, Electrical, Instrumentation, Electronics or Control Systems).
• Instrumentation – Compex EX01-04 Hazardous equipment
• DSEAR – Compex EX01-04 – Hazardous equipment
• Operation and control of process plant and equipment

    Location, remuneration and timeframe of the Document Controller role:

• Aberdeen
• Immediate Start
• 6 months
• £30ph
• Inside IR35

    How to apply? To apply for this opportunity simply send a copy of your up-to-date CV and covering letter to [email protected] or call 02393 910 473 to speak to Lucy who can tell you more.   INDWPOWER

M&E Site Manager    Location – Various Start – ASAP Duration – 12 Months £300 per day + Travel Expenses & Accommodation About the role: Astute’s Power team is currently partnering with an Industrial engineering company to recruit an M&E Site Manager for various projects and locations on a contract basis. If you’re a Site Manager and are looking to work for an organisation that are successful in the Biomass & EfW sector and have long term opportunities within the sector and business, then upload your CV to apply today. As the Site Manager, you will be required to oversee the work force on all M&E projects. Responsibilities and duties:

• Quantifying works required on site.
• Scheduling works
• Read and understand technical drawings.
• Compile allocation sheets

• Auditing of Site Safety Procedures, Verification of Site Safety and monitoring compliance with Health and Safety requirements. Record of any safety incidents or infringements and actions taken.

Professional qualifications: We are looking for someone with the following:

• SMSTS (Site Management Safety Training Scheme)
• CSCS / CCNSG Safety Passport
• Experience in working with Structural Steel with a Mechanical background.
• Experience in either the Biomass or EfW (Energy from Waste/Waste to Energy) sectors.
• Flexibility to travel across various sites and locations.

How to apply? To apply for this opportunity simply send a copy of your up-to-date CV and covering letter to  [email protected]  or call 02393 910 473 to speak to Lucy who can tell you more.  

Astute’s Power team is partnering with a leading insulation subcontractor in the Energy from Waste sector to recruit Thermal Insulation Engineers on a 10-month contract for its Essex site. The Thermal Insulation Engineer role comes with an hourly rate of £21.00.             Key skills  

• Preparing areas on site to be insulated
• Fitting insulations to engineering plans
• Secure and fasten insulation and sealing work areas after
• Work closely with Thermal Insulation Labourer on day -to – day basis
• Adhere to all general H&S on site
• Must hold TICA /NVQ and either CSCS / CCNSG
• Site experience in either Oil & Gas, Energy, Nuclear, Waste Management or similar

Location, remuneration and timeframe of the Thermal Insulation Engineer role  

• Essex
• £21.00 per hour (Monday – Friday)
• £27.95 per hour (Saturdays)
• 10 Months minimum

Astute’s Power team is partnering with a leading Mechanical & Electrical Subcontractor within the Energy from Waste sector to recruit an Electrical Engineer on a 6-month contract for its Birmingham site. The Electrical Engineer role comes with a day rate of £400.             Key skills  

• Assist with the installation of electrical scope which includes Electrical Equipment, CMS (primary & secondary), cable installation, cable terminations, lighting, earthing, lightning protection, instrumentation and controls etc.
• Review electrical drawings for buildability and proposed installation methodology
• Liaise closely with the planner to ensure all take-offs are incorporated within the programme and the installed measure is correct to ensure accurate progress is recorded
• Liaise with the client for solutions to any design issues encountered and formalise through the correct project process
• Co-ordinate with internal teams, subcontractors and suppliers to ensure a smooth execution of the electrical works scope
• Assist with the planning, forecasting labour levels etc. to undertake the works
• Oversee the installation of the electrical equipment to ensure it is safely installed and all testing is undertaken correctly and in line with manufacture recommendations
• Ensuring all works are being undertaken safely and in accordance with the project H&S requirements
• Must have worked on large industrial projects 

Location, remuneration and timeframe of the Electrical Engineer role  

• Birmingham
• £400.00 Per Day
• Outside IR35
• 6 Months

Astute’s Power team is partnering with a leading EPC contractor to recruit an EC&I Engineer on a 5-month contract for its West Midlands site.    The EC&I Engineer role comes with a day rate of up to £450.00 per day Outside of IR35.     Key skills   

• Ensure compliance with construction, health and safety regulations.
• Supervise the application of established quality control procedures.
• Analysis, management and interpretation of electrical drawings specifications.
• Demanding quality in the work and compliance with deadlines by the contractor.
• Follow-up of the contractor's productivity and compliance with work programs. Carrying out on-site
• measurements with the contractor.
• Confirm and report on the contractor's progress.
• Coordinate quality inspections and reports with the QA/QC team.

        Location, remuneration and timeframe of the role    

• West Midlands
• Up to £450 per day
• Outside of IR35

 

Astute’s Power team is partnering with a modular building contractor to recruit a Site Manager on a 6-month contract for its site in Oxfordshire. The Site Manager role comes with a day rate of £400.00.             Key skills  

• Overseeing site day-to-day activities and installation of modular builds
• Adhering to HSE requirements
• Ensuring transport and deliveries are kept on top of on site
• Liaison with the Site and Office teams regularly
• Raise and Sign-off permits
• Must hold modular build experience
• Must hold an CSCS and SMSTS
• First Aid (beneficial)

Location, remuneration and timeframe of the Site Manager role  

• Oxfordshire
• 6 Months
• £400.00-£450.00 Per Day

Astute’s Power team is partnering with a leading principal contractor in the Energy from Waste sector to recruit a Commissioning Shift Team Leader on a 6 month contract for its Leeds site. The Commissioning Shift Team Leader role comes with a day rate of £550.             Key skills  

• Ensure that all relevant HSEQ requirements are incorporated into area of responsibility and that, in consultation with site management, HSE and commissioning team, HSE hazards are eliminated or mitigated to the extent practicable
• Prepare and issue permits to Work and system isolations for works within the shift
• Ensure that works within area of responsibility are executed in accordance with the contract and conform with project time requirements
• Independently operate, monitor, and maintain systems according to the scope of responsibility, in the control room and on site
• Update and maintain shift logs and maintenance regimes
• Overseeing the work performed by shift personnel and suppliers during operation
• Liaise and coordinate with other project team members, in particular the Commissioning Manager and Commissioning Lead Engineers
• Records all operational events in the shift logbook
• Participate in regular control tours throughout the plant
• Deliver Lessons Learned and feedback for current and future projects
• Keep the Commissioning Manager / Site Manager informed of all site-related activities
• Must have EfW experience

  Location, remuneration and timeframe of the Commissioning Shift Team Leader role  

• Leeds
• 6 Months minimum
• £550.00 per Day
• Outside IR35

Astute’s Power team is partnering with a leading principal contractor in the Energy from Waste sector. They are looking to recruit a Site Quality Manager on a 12-month minimum contract for its site in Southeast of England.       The Site Quality Manager role comes with a day rate of £600.      Key skills required for the Site Quality Manager role   

• Overall Site Quality Control (QC) lead & manager of the Site Quality team, reporting directly to the Project Site Manager (PSM), with functional reporting to the Project Quality Manager (PQM)
• Demonstrates leadership and commitment to Health, Safety, Environment (HSE) & enforces construction site HSE requirements, and is required to support the PSIM in implementation of the site HSE policies as needed
• Ensures that relevant quality certification necessary for site works are available and are valid and ensure that approved testing equipment is calibrated and properly used
• Participates in the review and approval of assembly test plans and other quality-related documents (e.g. manufacturer approvals, process skills, personnel qualifications, inspection instructions) before installation. Responsible for organising, managing and conducting the intermediate and final inspections at construction site (IIS, FIS, MEC/TOP), according to the approved QC plan
• Ensures that the quality requirements as per Inspection & Test Plan are fulfilled by the contractor, with progress and deviations recorded in the QC tool (PIRS web, LMS or ALP) and communicated to the respective contractor for action and through regular site walkdowns, identifies potential sources of deviation to the contractual requirement and records them in the QC tool
• Must hold either EfW and Boiler experience or Boiler/ Power Plant experience
• Welding Certificates required

  Location, day rate and timeframe of the Site Quality Manager role      

• Southeast of England

• £600 per day 

• 12 months minimum  

 

Astute’s Power team is partnering with a leading principal contractor in the water treatment sector who are looking to recruit a 2D/3D BIM Modeller on a 12-month minimum contract for its London site.      The BIM Modeller role comes with a competitive day rate.      Key skills required for the BIM Modeller   

• Create models aligned with the BIM Execution Plan and information requirements.
• Enters data into the elements of the model, complying with the requirements established for this purpose by the Information Manager.
• Participates in coordination meetings.
• Demonstrates knowledge of BIM processes (3D, 4D…).
• Demonstrates knowledge in the use of authoring BIM software.
• Familiar with the Common Data Environment (CDE) organization.
• Issues BIM design models in form and time.
• Generate the resources needed for modelling, such as families, schedules with the supervision and under the guidelines of the BIM Manager.
• Coordinates its modelling with other disciplines for the detection and correction of interferences with the support of the BIM Manager and the head of the technical office.
• Must hold Revit / (ACC 360) experience
• Navisworks and/or AutoCAD / Civil 3D / Plant 3D experience

  Location, day rate and timeframe of the BIM Modeller      

• London 

• 12 months minimum