Casey Smith

Job Title:  

Overnight Sanitation Graveyard Shift $23.00/hr Pay: $23.00/hour Hours: Friday to Sunday 7:00PM - 7:00AM Start Date: ASAP We are seeking an Overnight Sanitation Worker for a Temp-Hire position with our client, a well established food production firm specializing in making the healthiest cultured foods, the right way, located in Eugene, Oregon. The Overnight Sanitation Worker will play an essential role in the hands on manufacturing of yogurt, cottage cheese, and dairy products. This is a great opportunity to be a part of a local manufacturing facility and further your career in this industry.

As an Overnight Sanitation Worker, you will be responsible for:

• Ensure all food production and packaging equipment and facilities are cleaned per a Master Schedule and company procedures
• Clean all machines thoroughly as per the strict standard operating procedures. This requires the disassembly, reassembly, cleaning, and sanitizing of equipment.
• HACCP – Environmental swabbing and testing (ATP, Salmonella, Listeria), Brittle Plastic/Broken glass inspections, eliminate organic and chemical residue form product contact surfaces, and monitor bullet magnets.
• Follow all safety procedures and policies and report any unsafe or unsanitary conditions immediately to supervisor on duty.
• Adhere to Good Housekeeping Practices
• Follow Good Manufacturing Practices and individual personal hygiene practices at all times.
• Maintain daily reports and records as assigned
• Train and Certify employees as assigned.
• Complete all other tasks/duties as assigned by Supervisor
• Responsible for supporting and maintaining Food Safety and Quality programs

The ideal candidate for this role will have:

• On feet 8+ hours a day, bending, stooping, twisting
• Physical position! Must be able to lift 50lbs throughout shift

Benefits:

• Ask us about our Referral Bonus Program to earn extra cash!

Ready to take the next step? Apply now for this Overnight Sanitation role in Eugene—or contact us to learn more!

#STEUG

Maintenance Technician

Job Type: Full time

Shift Schedule: Mon to Fri 7:00am to 3:30pm, some overtime

Salary: $29 -$31 DOE

 ** Pre-employment background check and drug screen required.

 

Maintenance Technician Equipment Diagnosis and Repair

• Diagnose issues with malfunctioning mechanical/electrical equipment and complete required repairs
• Perform minor building plumbing, electrical and painting repairs as needed
• Execute preventive maintenance procedures and assist maintenance lead/manager in outage planning
• Other accountabilities as required

 

Maintenance Technician Job Requirements

• High School diploma or GED required with vocational training highly preferred 
• One to five years mechanical and electrical troubleshooting skills in an industrial work setting. 
• Pneumatic & basic hydraulic knowledge preferred
• Ability to prioritize tasks and follow specified procedures
• Will need to be able to lift, push, or pull up to 50 lbs unassisted 
• Ability to work all shifts and call ins if needed

Position: Assembler Pay: $20-22 DOE Shift: Monday-Friday: 7am-3:30pm OR Four 10 hour days 6am-4:30pm Monday-Thursday or Tuesday-Friday Start Date: ASAP  A long-standing manufacturer in Redmond is looking for a reliable and positive Assembler to add to the team.  Duties and Responsibilities for Assembler:

• Follow all safety regulations - report safety hazards, emergencies, and occupancies. 
• Prioritize a clean and safe job efficiencies must be continually improving.
• Use fixtures or templates to build equipment as required per blueprint. 
• Assemble components using various tools and equipment
• Verify performance of product and prepare for shipment.
• Record all necessary data pertaining to product performance.
• Interact with fellow workers to exchange information accurately.
• Properly use bar code system to reflect time charged to jobs.
• Follow verbal and written instructions given by Production Supervisor.

Skills and Qualifications for Assembler:

• Able to read routers, bills of materials, and drawings to determine material requirements.
• Able to read and understand blueprints.
• High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
• Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Interpret a variety of instructions furnished in written, oral, blue print, or schedule form.

Physical Demands 

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job:

• Stand and use hands to finger, handle, or feel objects, tools, or controls. 
• Reach with hands and arms. 
• Lift and/or move up to 50 pounds. 
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Work Environment: Assembler 

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job:

• Occasionally works near moving mechanical parts
• Occasionally exposed to fumes or airborne particles.
• The noise level in the work environment is usually loud.

#STBND

Position: CNC Machine Operator  Pay: $20 to 22 DOE  Schedule: Monday-Friday: 7am-3:30pm OR Four 10 hour days 6am-4:30pm Monday-Thursday or Tuesday-Friday Start Date: ASAP  Long-standing manufacturer in Redmond who makes food processing equipment is seeking a CNC Machine Operator. Amazing company with opportunity for longevity and growth.  Duties and Responsibilities for CNC Machine Operator:

• At all times safety is a top priority while performing any part of your Machine Operators form metal parts from sheet and/or plate material of different types using CNC machines •Operators are responsible for making the necessary adjustments to ensure that it is correctly set up, functioning properly and producing parts that meet blueprint specifications •At all times safety is a top priority while performing any part of your job •Follow instruction given by Supervisor •Operates CNC milling and press brake to form metal parts per specifications identified on the blueprint •Reads job specifications to determine machine adjustments and material requirements •Changes out tooling as required to meet blueprint specifications •Observes machine operation to detect workpiece defects or machine malfunction •Measures workpiece dimensions to determine accuracy of machine operation •Stacks and transports finished workpieces for delivery to the next station •Operates machines at production level with little supervision •Able to read and comprehend basic blueprints •Safely operator basic hand tools (grinders, bevel mills, drills, etc.) •Other duties as assigned

Skills and Qualifications for CNC Machine Operator:

• EDUCATION & EXPERIENCE: High school diploma or general education degree (GED); or six months to a year of related experience and/or training; or equivalent combination of education and experience •Ability to read and comprehend simple instructions, short correspondence, and memos •Ability to write simple correspondence •Ability to effectively present information on a one-on-one basis •Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals •All candidates must successfully complete a pre-employment drug screen and background and reference check

Physical Demands CNC Machine Operator 

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job:

• Stand and use hands to finger, handle, or feel objects, tools, or controls. 
• Reach with hands and arms. 
• Lift and/or move up to 50 pounds. 
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Work Environment CNC Machine Operator 

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job:

• Occasionally exposed to fumes or airborne particles.
• The noise level in the work environment is usually loud.

#STBND

 

Position: Finishing Tech Pay: $20 to 22 DOE Hours: Monday-Friday: 7am-3:30pm OR Four 10 hour days 6am-4:30pm Monday-Thursday or Tuesday-Friday Start date: ASAP  A long-standing manufacturer in Redmond is seeking a Finishing Tech. Amazing company, great team, opportunity for longevity and growth.  Duties and Responsibilities for Finishing Tech:

• At all times safety is a top priority while performing any part of your job.
• Primary job is to perform necessary tasks to produce the required surface finish on parts and assemblies.
• Reads job blueprints to determine finish requirements.
• Set up machines, stack, mark, pack, and transport finished work pieces to next work center.
• Understand and operate machines at production level with Supervision.
• Performs minor machine maintenance on machines.
• Remove burrs, sharp edges and imperfections to attain finish requirement using routers and other hand tools.
• Always wear grinding shield while grinding - gloves are also recommended.
• Stay in work area and works well with others.
• Properly use barcode system to reflect hours charged to job.
• Contact Supervisor or Weld Lead if there is a problem with job or equipment.

Skills and Qualifications for Finishing Tech:

• High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
• Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Write simple routine reports and correspondence. Ability to speak effectively before other employees in the organization.
• Ability to add and subtract two digit numbers and to multiply and divide with 10s and 100s.
• Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Interpret a variety of instructions furnished in written, oral, blue print, or schedule form.
• Must be able to use a tape measure and calipers 

Physical Demands 

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job:

• Stand and use hands to finger, handle, or feel objects, tools, or controls. 
• Reach with hands and arms. 
• Lift and/or move up to 50 pounds. 
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Work Environment: Finishing Tech

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job:

• Occasionally works near moving mechanical parts
• Occasionally exposed to fumes or airborne particles.
• The noise level in the work environment is usually loud.

#STBND

 

Job Title: Inventory Coordinator

Schedule: Monday–Friday, 8:00am–4:30pm Pay Range: $20–$22/hour Duration: Temp-to-Hire (after 90 days)

Overview:

Selectemp is hiring for an Inventory Coordinator. The Inventory Coordinator supports company-wide inventory management by maintaining accurate counts, analyzing usage trends, and ensuring materials meet production needs. This position works both in-office and on the plant floor performing cycle counts, reconciling discrepancies, and partnering with operations, purchasing, and finance teams. The ideal candidate is detail-oriented, organized, and able to collaborate effectively across all levels of the organization.

Key Responsibilities:

• Perform daily inventory control, including cycle counts, adjustments, and reconciliations.

• Track, analyze, and report on inventory movements, returns, and usage trends.

• Investigate and resolve inventory discrepancies; recommend process improvements.

• Assist with receiving, shipping, and classification of materials to ensure accuracy.

• Partner with manufacturing teams to identify non-moving products and reallocate materials.

• Support destruction/scrap approvals and annual physical inventory audits.

• Collaborate with Finance to maintain accurate inventory valuation and costing data.

• Develop and maintain efficient inventory procedures and documentation.

• Communicate inventory updates clearly to stakeholders across departments.

Qualifications:

• Minimum 3 years of related inventory control or manufacturing experience.

• Proficient with inventory management or ERP software.

• Strong knowledge of Microsoft Excel and Word.

• Excellent analytical, problem-solving, and organizational skills.

• High attention to detail and accuracy.

• Effective communication and teamwork skills across all levels.

• Ability to work independently and thrive in a fast-paced environment.

• Strong decision-making and conflict resolution skills.

  Ready to take the next step? Apply now for this Inventory Coordinator role in Harrisburg, Oregon—or contact us at 541-967-6881 for assistance with applying!

Job Title:

Manual Machinist  - Urgently Hiring Pay: $24.00 - $28.00+ per hour, DOE Hours: Monday - Friday, 8:00AM - 5:00PM Start Date: ASAP We are seeking an experienced Machinist for a Temp-Hire position with our client, a reputable hydraulic repair facility located in Springfield, Oregon. The Machinist will play an essential role in the hands on operation of machinery and lathes.  The ideal candidate will maintain an organized and safe environment while actively contributing to the efficient processing of hydraulic repair. This is a great opportunity to be a part of a long-standing business, that has been in operation for 40+ years and further your career in this industry, located in Springfield, Oregon.

As a Machinist, you will be responsible for:

• Machine operator
• Run Manual Metal Lathe
• Use of Grinder
• Some welding
• Cleaning up as needing using brooms

The ideal candidate for this role will have:

• Must have machining experience 
• Must be mechanically inclined
• Knowledge of hydraulic and pneumatic components a must
• Comfortable using many pneumatic and hand tools
• Must be able to lift/maneuver 40-50 lbs consistently
• Must be able to read & use a tape measure & convert to decimals
• No certifications required

Benefits:

• Ask us about our Referral Bonus Program to earn extra cash!

Ready to take the next step? Apply now for this Machinist role in Springfield—or contact us to learn more!

#STEUG

Now Hiring: General Plant Labor – Corvallis, OR

Location: Corvallis, OR

Schedule:  Sundays Only. Multiple Shifts Available. 6am to 2pm | 2pm to 10pm | 10pm to 6am Duration:  Seasonal (expected to last a couple of months) Pay: $15.05

Selectemp is hiring dependable individuals to join a local food production facility in Corvallis. Work days are only on Sundays with multiple shifts available - this is a great fit for anyone needing to pick up additional hours for work. If you’re a team player with a strong work ethic and a keen eye for detail, this is a great opportunity to get your foot in the door with a respected company.

What You’ll Do:

• Inspect raw and packaged product for quality
• Set up and stage packaging materials for production
• Maintain a clean and safe work environment
• Remove waste from production areas
• Washing flats (Small containers
• Follow all food safety and safety procedures
• Perform other duties as assigned

This role is key in ensuring the safety and quality of food products across all shifts.

What We’re Looking For:

• Reliable and punctual team players

• Ability to follow written and verbal instructions

• Detail-oriented with a strong sense of responsibility

• Willingness to learn and take initiative

• Flexible and adaptable in a fast-paced environment

Preferred Skills:

• Experience in food production or general labor preferred but not required

• Comfortable working in various environmental conditions

• Physically able to stand, bend, lift, and move throughout shift

Why Work with Selectemp?

• We connect you with reputable local employers

• Opportunities to grow your skills and build your resume

• Support from our team throughout your assignment

   

Job Title: Lead CNC Machinist (Weekend Shift) - Urgently Hiring!

Pay: $21.00 - $42.00 per hour  -Weekend Morning Differential: $2.50/hr. Weekend Afternoon differential: $3.00/hr Shifts available: Weekend shift: Friday–Sunday with overtime  - Morning: 3:30AM - 3:30PM - Afternoon: 3:30PM - 3:30AM Start Date: ASAP

Summary:

We are seeking a Lead CNC Machinist for a Temp-Hire position with our client, a reputable manufacturer, located in Albany, Oregon. This role offers hands-on experience with state-of-the-art CNC equipment in a high-precision manufacturing environment. Ideal for someone with strong machining and quality control skills who’s eager to grow, learn, and contribute to a collaborative team.

As a CNC Machinist, you will be responsible for:

• Setting up and operating CNC mill-turn equipment safely and efficiently.
• Interpreting engineering drawings, GD&T, and machining specifications.
• Loading and measuring materials, ensuring parts meet dimensional requirements.
• Diagnosing and resolving machining issues in coordination with programmers and team members.
• Maintaining accurate production and inspection documentation.
• Supporting other shop functions as needed, including manual lathe, EDM, and forging.

The ideal candidate for this role will have:

• High school diploma or GED required.
• Vocational training or minimum 2 years of CNC machining experience.
• Proficiency in measurement tools and in-process inspection.
• Strong math, geometry, and blueprint reading skills.
• Experience with Epicor or similar ERP systems preferred.

Benefits upon permanent hire:

• 401(k) with company match
• Medical, dental, and vision insurance
• Paid time off
• Flexible spending account
• Life insurance and disability coverage
• Employee assistance program

Ready to take the next step? Apply now for this CNC Machinist role in Albany—or contact us to learn more!