Lucy Pook

Astute’s Power team are looking to recruit a Outage QA/QC Engineer on a 3 week outage in Cheshire starting in March 2026. The position will be on days only, working 12 hours, 7 days a week once in outage.    The Outage QA/QC Engineer roles come with an hourly rate of £40.00. Key skills required for Outage QA/QC Engineer role  

• Provide QA/QC oversight during vessel boxing-up activities, ensuring correct gasket installation, bolting procedures, torquing, and final closure compliance.
• Monitor and inspect valve welding activities, confirming adherence to approved WPS/PQR, material traceability, welder qualifications, and NDT requirements.
• Oversee welding works, ensuring compliance with welding procedures, pre/post-weld heat treatment requirements, and inspection hold points.
• Oversee valve overhaul activities, verifying inspection records, component replacement, pressure testing, and correct reassembly/ installation.
• Ensure all quality documentation, ITPs, weld records, NDT reports, and test certificates are completed and compiled accurately.
• Liaise with site management, contractors, and client representatives on quality matters.
• Raise and manage NCRs where required and ensure close-out of quality issues.
• Maintain a strong focus on safety, compliance, and outage schedule requirements.
• Must have p roven experience in QA/QC within power generation, heavy industry, or similar environments.
• Must have s trong knowledge of welding standards, pressure systems, and mechanical inspection practices.
• Ideally hold CSWIP or equivalent welding inspection certificate.
• CCNSG/CSCS Card 

Location, day rate and timeframe of the Outage QA/QC Engineer role  

• Cheshire
• £40.00 per hour
• March 2026 
• Days 
• 7 days / 12 hrs

Astute’s Power team is looking to recruit a P6 Planner on a pipework installation project in Hertfordshire on a 9-12 month contact basis for a start in November.     Key skills required for the P6 Planner:    

• Working with the PM and pipe coordinators to create a resource loaded baseline (contract) schedule in Primavera P6.
• Progress will be measured using physical percent complete. User defined fields will establish the physical percent complete by recording meters installed against individual sub-system total meterage’s.
• Record progress and monitor performance against scheduled percent complete. 
• Manage the schedule daily, record delays by intersecting activities with delay durations inserted as activities to assist commercial EOT claims.
• Carry out routine critical path analysis and identify mitigation measures to recover any negative float / delays.
• Produce look ahead schedules as identified by the contract and / or requested by the Project Manager.
• Produce progress / quantity curves for weekly reports.
• Experience on piping or pipework scope of works will be highly beneficial
• Must have CSCS Card or able to obtain one.

Location, day rate and timeframe of the P6 Planner    

• Hertfordshire
• November 2025
• 9-12 Months
• Competitive hourly/daily rate

Astute’s Power team is partnering with a cable solutions provider to recruit a Project Manager for its site in Dunbar on a permanent basis.              Key skills  

• Manage and oversee the execution to completion of the project.
• Awareness to specific site characteristics (topography, landscape, environmental and ecological constraints, current infrastructure, sustainability, health and safety)
• Work closely with the design and wider team to manage and develop any necessary Scope of Works, Division of Responsibilities, Employer and or Client Requirements and Technical Specifications for Onshore Cable works.
• Interface extensively with the client’s offshore cable team to manage the interface of the cable landfall.
• Actively manage to appointment any required subcontract requirements, specifically HHD/Civils.
• Source, review, appoint any such required consultants and/or internal colleagues to develop and carry out pre-condition surveys.
• Interface, liaison and coordination with any parties responsible for coinciding works.
• Organise and chair project update meetings with any relevant stakeholder/parties.
• Must have proven experience in a similar position within Power/Energy/Renewables construction projects with ideally a HV (High Voltage) background.
• Hold an understanding / background in construction civil engineering.
• Must have strong communication skills with an ability to engage with clients
• Must be flexible to travel to other sites for project meetings from time to time.

Location, remuneration and timeframe of the Project Manager role  

• Dunbar
• November start
• Competitive Salary
• 25+ days holiday
• Attractive benefits package

 

Astute’s Power team are looking to recruit a Mechanical Construction Crane Supervisor on an construction project in Leeds on a short-term contract, starting immediately.             Key skills

• Oversee overhead crane operations including lift planning, exclusion zones, lifting activities and compliance with lifting regulations
• Ensure all works are carried out in line with RAMS, permits to work, method statements and health & safety procedures
• Ensure all plant, lifting equipment and tools are inspected and fit for purpose before use
• Support commissioning, testing and snagging activities during project completion phases
• Ensure workforce compliance with PPE requirements, environmental controls and company procedures
• Promote a strong safety culture and lead by example on site
• Must have previous experience as a Construction Site Supervisor (mechanically bias) within heavy industrial environments.
• Experience supervising overhead crane maintenance or lifting operations on construction plants
• Must hold relevant tickets including SSSTS, CSCS, CPCS A62, NPORS

Location, remuneration and timeframe of the Mechanical Construction Crane Supervisor role  

• Leeds
• Immediate Start
• 2-3 months minimum
• £550.00 per day (flexible for the right candidate)

Senior Quantity Surveyor   Permanent Northeast London £65,000-£70,000 + Benefits About the role: Astute’s Power team is currently partnering with an EPC Contractor on a new build Energy from Waste facility to recruit a Senior Quantity Surveyor for its Northeast London site. The Senior Quantity Surveyor role comes with a flexible salary from £65,000 - £70,000 + plus pension, life assurance, private health care and a great holiday package. If you’re a Senior Quantity Surveyor and are looking to work for an organisation that are successful in the Energy from Waste sector and have great opportunities to progress within your position, then upload your CV to apply today. Responsibilities and duties:

• Reporting to the Subcontracts & Commercial Managers you will:
• Be aware of the subcontract’s status and scope and report to Project Team.
• Develop and maintain Correspondence Log with the Subcontractors and inform of any changes on Cost of Time from/to sub-contractors that may become a Client Change Order.
• Suggest corrective actions from/to sub-contractors that would be effective on time and cost.
• Ensure all BOQ are updated in line with the last IFC drawings received.
• Inform both Project Team and Subcontractors about FEWO (Field Extra Work) procedure.
• Inform to Subcontractors about approval or contractual reasons for rejection and/or modification of any submitted FEWO.
• Develop and maintain the FEWO Log for Subcontractors under your control.
• Evaluate and study under contractual basis, all the Compensation Event (CE) submitted by the Subcontractors; this activity will be coordinated with the Construction team.
• Inform to the Subcontractor, about the approval or the contractual reasons for the rejection and/or modification of any CE submitted.
• Develop and maintain the CE Log for the subcontracts under his/her control.
• Inform to the Project team about the Bach-charges (BC) procedure.
• Prepare the BC Notices to the Subcontractors and ensure the contra-charges are applied.
• Inform to the Project team and Subcontractors about the Contradictory Price (CP) procedure.
• Evaluate and study under the contractual basis, all CP submitted by the Subcontractor.
• Develop and maintain the CP Log for the subcontracts under your control.
• Inform to the Subcontractor, about the approval or the contractual reasons for the rejection and/or modification of any PA submitted.
• Issue of the Payment Certificates (PC) to the Subcontractors.

Professional qualifications: We are looking for someone with the following:

• Educated to a degree level or equivalent (BSc Quantity Surveying preferred)
• Main Contractor experience desired
• Knowledge of building and construction.
• To be based at Site (London, UK)
• Project experience within Energy from Waste, OCGT, CCGT, Power Stations. 

Salary and benefits of the Senior Quantity Surveyor role:

• £65,000-£70,000 +
• Pension
• Life Assurance & Health Care package
• Generous holiday allowance

How to apply? To apply for this opportunity simply send a copy of your up-to-date CV and covering letter to [email protected] or call 02393 910 473 to speak to Lucy who can tell you more. INDPOWER  

Astute’s Power team is partnering with leading principal contractor in the Energy from Waste sector to recruit a Commissioning Mechanical Maintenance Engineer on a project in Kent.            Key skills  

• Support the commissioning team in all mechanical issues (filter cleaning and exchange, dismount pumps, etc.) 
• Reports any variations and issues to the Commissioning Manager 
• Maintains all mechanical tools in a clean state and ready to use 
• Liaises and coordinates with other project team members, in particular the Commissioning Manager, Commissioning Lead Engineers and Operations personnel 
• Review and implement maintenance routines and schedules as per supplier OM and plant maintenance and preservation requirements 
• Ensures routines are maintained and recorded on the plant management systems i.e. PAMELA and or CMMS etc 
• Carry out required maintenance tasks in the field and record completion of maintenance tasks in shift books, produce activity progress report on regular basis as required by Commissioning manager 
• Collect samples as required by the commissioning manager or lead engineer i.e. water, oil, waste, IBA etc 
• Must have mid-level experience in a maintenance role in EFW, Power plant and/or heavy industrial setting.
• Beneficial to have strong understanding of mechanical systems i.e pumps, filters, and rotating equipment.

Location, remuneration and timeframe of the Commissioning Mechanical Maintenance Engineer

• Kent
• December 2025
• 4-month minimum contract
• £500 - £550 per day (Outside IR35)

CDM Manager – EFW £550-£600 per day (Outside IR35) 12 Months Astute’s Power team is currently partnering with an EPC Contractor on their new build Energy from Waste facilities to recruit a CDM Manager. This position is available on either a part time or full-time basis across sites in Birmingham and Northeast of London. The CDM Manager role comes with a day rate of £550-600. Key skills:

• Undertake suitable pre-qualification exercise and advise Project Engineering Manager in respect of project competency status.
• Manage CDM compliance throughout the project duration.
• Identify & Manage pre-construction information (PCI): Review PCI available and, where applicable identify gaps in content and formal communication of the same.
• Undertake assessments arising from all design stakeholders and manage/coordinate H&S information as applicable. Designer residual risk will feed into the Project Risk Register.
• Develop and manage the project H&S file strategy.
• Feed PCI into the mobilisation process and collaborate with Contractors (including PC’s) in the development of design risk information and constructability reviews.
• Produce and deliver project specific CDM, or other training where a need is identified, including to offshore (non-UK) design organisations.
• Advise on CDM related issues such as design change, material (COSHH) issues and arising from unforeseeable events.

How to apply? To apply for this opportunity simply send a copy of your up-to-date CV and covering letter to [email protected] or call 02393 910 473 to speak to Lucy  who can tell you more.  

Astute’s Power team is partnering with a Principal Contractor on an Energy from Waste project to recruit a Lead Commissioning Engineer on a 12-month minimum contract for its Leeds site.    The Lead Commissioning Engineer role comes with a day rate of £550 per day.      Key skills    

• Demonstrate leadership and commitment to HSEQ.  Actively encouraging and leading the contractor teams to implement and comply with project HSEQ requirements.
• Ensure that all relevant HSEQ requirements are incorporated into commissioning in consultation with site management, HSE and Commissioning team and that HSE hazards are eliminated or mitigated to the extent practicable
• Ensure that risk assessments and method statements (RAMS) are reviewed with regards to HSEQ requirements, and that work is carried out in accordance with the RAMS
• Lead the commissioning within area of responsibility for the principal contractor and ensure works are executed in accordance with contract requirements, and conform with the approved drawings and standards, project time and budget
• Supervise and check the commissioning works being performed by the contractor in respect of timescales, HSEQ and compliance with the approved drawings and standards
• Liaise and coordinate with other project team members, the Commissioning Manager, Erection Supervisors, HSE and Commercial Dept regarding commissioning works on time delivery, at costs and according to the specified quality and HSE requirements
• Co-ordinates sub-contractor and vendor activities on site in line with programme and project requirements. Ensuring that sub-contractors are coordinated with other site works, material and all other requirements are in place in order for them to efficiently perform required tasks.
• Keep the Commissioning Manager / Site Manager informed of all activities

      Location, remuneration and timeframe of the Lead Commissioning Engineer role    

• Leeds
• £550 per day
• 12 Month Contract
• Outside IR35

 

Astute’s Power team is partnering with a Principal Contractor in the Energy from Waste Sector to recruit a Commissioning Lead Engineer on a 12 months contract for its Leeds site. The Commissioning Lead Engineer role comes with a day rate of £550.             Key skills  

• Demonstrate leadership and commitment to HSEQ.  Actively encouraging and leading the contractor teams to implement and comply with project HSEQ requirements.
• Ensure that all relevant HSEQ requirements are incorporated into commissioning in consultation with site management, HSE and Commissioning team and that HSE hazards are eliminated or mitigated to the extent practicable
• Ensure that risk assessments and method statements (RAMS) are reviewed with regards to HSEQ requirements, and that work is carried out in accordance with the RAMS
• Lead the commissioning within area of responsibility for the principal contractor and ensure works are executed in accordance with contract requirements, and conform with the approved drawings and standards, project time and budget
• Supervise and check the commissioning works being performed by the contractor in respect of timescales, HSEQ and compliance with the approved drawings and standards
• Liaise and coordinate with other project team members, the Commissioning Manager, Erection Supervisors, HSE and Commercial Dept regarding commissioning works on time delivery, at costs and according to the specified quality and HSE requirements
• Co-ordinates sub-contractor and vendor activities on site in line with programme and project requirements. Ensuring that sub-contractors are coordinated with other site works, material and all other requirements are in place in order for them to efficiently perform required tasks.
• Keep the Commissioning Manager / Site Manager informed of all activities

Location, remuneration and timeframe of the Commissioning Lead Engineer role  

• Leeds
• £550.00 Per Day
• 12 Months
• Outside IR35